






Product Description


· Level 3 is enough for most applications; thicker the bag, higher the level required
· The red light is not predictable when plug into the power. It is only predictable when keep the handle pressed down on bottom. This is a protection for sealer
· When seal is done, the red light will go off. Don’t release the handle at once and keep the handle pressed down for a few seconds to get optimal results. If you use a 12-inch sealer, please put your hand on the middle of the handle would be better
· Replacements should be replaced when the PTFE (cloth) appears warn, discolored or sealing isn’t perfect
· Never wipe the heat seal strip with a wet cloth

Step 1
Plug into the power

Step 2
According to the thickness of bags, adjust the sealing timer to 1-8; and level 3 or 4 is enough for most bags; Thicker the bag, higher the level required

Step 3
No warm-up time needed, Just put the bag on the machine flat

Step 4
Press dawn the sealing machine’s arm.
When the signal light is off automatically, keeping the handle pressed down for a few seconds would get optimal results
Guide for Replace the Sealing Machine

1.Using the tools to loosen the screws on the sealing machine

2.Remove the old heat sealing strip and heating element

3.Install a new heat sealing element

4.Then tighten the screws

Instantly use: No warm up time needed, Lightweight Design 8 stalls temperature adjustme impulse manual hand bag sealer to meet any different materials bags. Important: This machine can’t cut any bags!
Manual Impulse Sealer: Built-in fuse for safe using, Easy to use and to clean,ideal for household, retail, produce, grocery Stores, and industrial sealing with a certain quality superiority.
Easy operation:Place the bag on the original seal, Keep the handle pressed down for 2-3.5 seconds to get seals optimal results.
Energy Conservation Manual Impulse Sealer,Non-Toxic, Odorless, Durable, Reinforced and Compression,could seal more than 10000 bags.
100% Satisfied Guarantee: If there is any problem with our products, please contact us and we would offer you a satisfy solution.
Customers say
Customers find the vacuum sealer works well and is simple to use, with one mentioning it handles different material thicknesses effectively. The sealing performance and heat level receive mixed feedback – while some say it seals well and heats perfectly, others report it doesn’t seal properly and has hot spots. Value for money opinions are divided between those who find it good value and those who consider it a waste of money.




There are no reviews yet.